mip/Data/BulkLoad/CAVEATS.csv

1	DOCUMENT_POSITION	JOB TYPE	METER TYPE	SERVICE PRESSURE	SORT_ORDER	TEXT
2	CONT_SUM	ADVERSARIAL	DIAPHRAGM	LP	1	plus purging on time and materials basis.
3	CONT_SUM	ADVERSARIAL	DIAPHRAGM	MP	1	plus purging on time and materials basis.
4	CONT_SUM	ADVERSARIAL	DIAPHRAGM	MP	2	excluding lifting gear charges
5	CONT_SUM	ADVERSARIAL	ROTARY	LP	1	plus purging on time and materials basis.
6	CONT_SUM	ADVERSARIAL	ROTARY	LP	2	excluding lifting gear charges
7	CONT_SUM	ADVERSARIAL	ROTARY	MP	1	plus purging on time and materials basis.
8	CONT_SUM	ADVERSARIAL	ROTARY	MP	2	excluding lifting gear charges
9	CONT_SUM	ADVERSARIAL	TURBINE	LP	1	plus purging on time and materials basis.
10	CONT_SUM	ADVERSARIAL	TURBINE	LP	2	excluding lifting gear charges
11	CONT_SUM	ADVERSARIAL	TURBINE	MP	1	plus purging on time and materials basis.
12	CONT_SUM	ADVERSARIAL	TURBINE	MP	2	excluding lifting gear charges
13	CONT_SUM	EXCHANGE	DIAPHRAGM	MP	1	excluding lifting gear charges
14	CONT_SUM	EXCHANGE	ROTARY	LP	1	excluding lifting gear charges
15	CONT_SUM	EXCHANGE	ROTARY	MP	1	excluding lifting gear charges
16	CONT_SUM	EXCHANGE	TURBINE	LP	1	excluding lifting gear charges
17	CONT_SUM	EXCHANGE	TURBINE	MP	1	excluding lifting gear charges
18	CONT_SUM	INSTALL	DIAPHRAGM	MP	1	excluding lifting gear charges
19	CONT_SUM	INSTALL	ROTARY	LP	1	excluding lifting gear charges
20	CONT_SUM	INSTALL	ROTARY	MP	1	excluding lifting gear charges
21	CONT_SUM	INSTALL	TURBINE	LP	1	excluding lifting gear charges
22	CONT_SUM	INSTALL	TURBINE	MP	1	excluding lifting gear charges
23	CONT_SUM	REMOVE	DIAPHRAGM	MP	1	plus purging on time and materials basis.
24	CONT_SUM	REMOVE	DIAPHRAGM	MP	2	excluding lifting gear charges
25	CONT_SUM	STD EXCHANGE	DIAPHRAGM	MP	1	excluding lifting gear charges
26	CONT_SUM	STD EXCHANGE	ROTARY	LP	1	excluding lifting gear charges
27	CONT_SUM	STD EXCHANGE	ROTARY	MP	1	excluding lifting gear charges
28	CONT_SUM	STD EXCHANGE	TURBINE	LP	1	excluding lifting gear charges
29	CONT_SUM	STD EXCHANGE	TURBINE	MP	1	excluding lifting gear charges
30	CONT_SUM	STD INSTALL	DIAPHRAGM	MP	1	excluding lifting gear charges
31	CONT_SUM	STD INSTALL	ROTARY	LP	1	excluding lifting gear charges
32	CONT_SUM	STD INSTALL	ROTARY	MP	1	excluding lifting gear charges
33	CONT_SUM	STD INSTALL	TURBINE	LP	1	excluding lifting gear charges
34	CONT_SUM	STD INSTALL	TURBINE	MP	1	excluding lifting gear charges
35	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	LP	1	plus purging on time and materials basis.
36	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	MP	1	plus purging on time and materials basis.
37	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	MP	2	excluding lifting gear charges
38	CONT_SUM_QA	ADVERSARIAL	ROTARY	LP	1	plus purging on time and materials basis.
39	CONT_SUM_QA	ADVERSARIAL	ROTARY	LP	2	excluding lifting gear charges
40	CONT_SUM_QA	ADVERSARIAL	ROTARY	MP	1	plus purging on time and materials basis.
41	CONT_SUM_QA	ADVERSARIAL	ROTARY	MP	2	excluding lifting gear charges
42	CONT_SUM_QA	ADVERSARIAL	TURBINE	LP	1	plus purging on time and materials basis.
43	CONT_SUM_QA	ADVERSARIAL	TURBINE	LP	2	excluding lifting gear charges
44	CONT_SUM_QA	ADVERSARIAL	TURBINE	MP	1	plus purging on time and materials basis.
45	CONT_SUM_QA	ADVERSARIAL	TURBINE	MP	2	excluding lifting gear charges
46	CONT_SUM_QA	EXCHANGE	DIAPHRAGM	MP	1	excluding lifting gear charges
47	CONT_SUM_QA	EXCHANGE	ROTARY	LP	1	excluding lifting gear charges
48	CONT_SUM_QA	EXCHANGE	ROTARY	MP	1	excluding lifting gear charges
49	CONT_SUM_QA	EXCHANGE	TURBINE	LP	1	excluding lifting gear charges
50	CONT_SUM_QA	EXCHANGE	TURBINE	MP	1	excluding lifting gear charges
51	CONT_SUM_QA	INSTALL	DIAPHRAGM	MP	1	excluding lifting gear charges
52	CONT_SUM_QA	INSTALL	ROTARY	LP	1	excluding lifting gear charges
53	CONT_SUM_QA	INSTALL	ROTARY	MP	1	excluding lifting gear charges
54	CONT_SUM_QA	INSTALL	TURBINE	LP	1	excluding lifting gear charges
55	CONT_SUM_QA	INSTALL	TURBINE	MP	1	excluding lifting gear charges
56	CONT_SUM_QA	REMOVE	DIAPHRAGM	MP	2	excluding lifting gear charges
57	CONT_SUM_QA	STD EXCHANGE	DIAPHRAGM	MP	1	excluding lifting gear charges
58	CONT_SUM_QA	STD EXCHANGE	ROTARY	LP	1	excluding lifting gear charges
59	CONT_SUM_QA	STD EXCHANGE	ROTARY	MP	1	excluding lifting gear charges
60	CONT_SUM_QA	STD EXCHANGE	TURBINE	LP	1	excluding lifting gear charges
61	CONT_SUM_QA	STD EXCHANGE	TURBINE	MP	1	excluding lifting gear charges
62	CONT_SUM_QA	STD INSTALL	DIAPHRAGM	MP	1	excluding lifting gear charges
63	CONT_SUM_QA	STD INSTALL	ROTARY	LP	1	excluding lifting gear charges
64	CONT_SUM_QA	STD INSTALL	ROTARY	MP	1	excluding lifting gear charges
65	CONT_SUM_QA	STD INSTALL	TURBINE	LP	1	excluding lifting gear charges
66	CONT_SUM_QA	STD INSTALL	TURBINE	MP	1	excluding lifting gear charges
67	DESC_WORK	ADVERSARIAL	DIAPHRAGM	LP	1	Purging of downstream pipework.
68	DESC_WORK	ADVERSARIAL	DIAPHRAGM	MP	1	Purging of downstream pipework.
69	DESC_WORK	ADVERSARIAL	ROTARY	LP	1	Purging of downstream pipework.
70	DESC_WORK	ADVERSARIAL	ROTARY	MP	1	Purging of downstream pipework.
71	DESC_WORK	ADVERSARIAL	TURBINE	LP	1	Purging of downstream pipework.
72	DESC_WORK	ADVERSARIAL	TURBINE	MP	1	Purging of downstream pipework.
73	TERM_COND	EXCHANGE	DIAPHRAGM	LP	11	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
74	TERM_COND	EXCHANGE	DIAPHRAGM	MP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
75	TERM_COND	EXCHANGE	ROTARY	LP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
76	TERM_COND	EXCHANGE	ROTARY	MP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
77	TERM_COND	EXCHANGE	TURBINE	LP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
78	TERM_COND	EXCHANGE	TURBINE	MP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
79	DESC_WORK	REMOVE	ROTARY	LP	2	excluding lifting gear charges
80	DESC_WORK	REMOVE	ROTARY	MP	2	excluding lifting gear charges
81	DESC_WORK	REMOVE	TURBINE	LP	2	excluding lifting gear charges
82	DESC_WORK	REMOVE	TURBINE	MP	2	excluding lifting gear charges
83	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	11	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
84	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
85	TERM_COND	STD EXCHANGE	ROTARY	LP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
86	TERM_COND	STD EXCHANGE	ROTARY	MP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
87	TERM_COND	STD EXCHANGE	TURBINE	LP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
88	TERM_COND	STD EXCHANGE	TURBINE	MP	12	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
89	TERM_COND	ADDON	DIAPHRAGM	LP	1	This quotation is based on there being a working LF connection on the existing meter.
90	TERM_COND	ADDON	DIAPHRAGM	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
91	TERM_COND	ADDON	DIAPHRAGM	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
92	TERM_COND	ADDON	DIAPHRAGM	MP	1	This quotation is based on there being a working LF connection on the existing meter.
93	TERM_COND	ADDON	DIAPHRAGM	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
94	TERM_COND	ADDON	DIAPHRAGM	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
95	TERM_COND	ADDON	ROTARY	LP	1	This quotation is based on there being a working LF connection on the existing meter.
96	TERM_COND	ADDON	ROTARY	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
97	TERM_COND	ADDON	ROTARY	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
98	TERM_COND	ADDON	ROTARY	MP	1	This quotation is based on there being a working LF connection on the existing meter.
99	TERM_COND	ADDON	ROTARY	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
100	TERM_COND	ADDON	ROTARY	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
101	TERM_COND	ADDON	TURBINE	LP	1	This quotation is based on there being a working LF connection on the existing meter.
102	TERM_COND	ADDON	TURBINE	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
103	TERM_COND	ADDON	TURBINE	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
104	TERM_COND	ADDON	TURBINE	MP	1	This quotation is based on there being a working LF connection on the existing meter.
105	TERM_COND	ADDON	TURBINE	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
106	TERM_COND	ADDON	TURBINE	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
107	TERM_COND	ADVERSARIAL	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
108	TERM_COND	ADVERSARIAL	DIAPHRAGM	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
109	TERM_COND	ADVERSARIAL	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
110	TERM_COND	ADVERSARIAL	ROTARY	LP	2	Lifting gear if required will be charged at a rate of £400 per day.
111	TERM_COND	ADVERSARIAL	ROTARY	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
112	TERM_COND	ADVERSARIAL	ROTARY	MP	1	Lifting gear if required will be charged at a rate of £400 per day.
113	TERM_COND	ADVERSARIAL	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
114	TERM_COND	ADVERSARIAL	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
115	TERM_COND	ADVERSARIAL	TURBINE	LP	2	Lifting gear if required will be charged at a rate of £400 per day.
116	TERM_COND	ADVERSARIAL	TURBINE	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
117	TERM_COND	ADVERSARIAL	TURBINE	MP	1	Lifting gear if required will be charged at a rate of £400 per day.
118	TERM_COND	ADVERSARIAL	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
119	TERM_COND	EXCHANGE	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
120	TERM_COND	EXCHANGE	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
121	TERM_COND	EXCHANGE	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
122	TERM_COND	EXCHANGE	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
123	TERM_COND	EXCHANGE	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
124	TERM_COND	EXCHANGE	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
125	TERM_COND	EXCHANGE	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
126	TERM_COND	EXCHANGE	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
127	TERM_COND	EXCHANGE	DIAPHRAGM	LP	9	This quotation is based on two visits, one to remove the exisiting meter, and one to install the new meter.
128	TERM_COND	EXCHANGE	DIAPHRAGM	LP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
129	TERM_COND	EXCHANGE	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
130	TERM_COND	EXCHANGE	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
131	TERM_COND	EXCHANGE	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
132	TERM_COND	EXCHANGE	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
133	TERM_COND	EXCHANGE	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
134	TERM_COND	EXCHANGE	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
135	TERM_COND	EXCHANGE	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
136	TERM_COND	EXCHANGE	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
137	TERM_COND	EXCHANGE	DIAPHRAGM	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
138	TERM_COND	EXCHANGE	DIAPHRAGM	MP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
139	TERM_COND	EXCHANGE	DIAPHRAGM	MP	11	Lifting gear if required will be charged at a rate of £400 per day.
140	TERM_COND	EXCHANGE	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
141	TERM_COND	EXCHANGE	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
142	TERM_COND	EXCHANGE	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
143	TERM_COND	EXCHANGE	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
144	TERM_COND	EXCHANGE	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
145	TERM_COND	EXCHANGE	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
146	TERM_COND	EXCHANGE	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
147	TERM_COND	EXCHANGE	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
148	TERM_COND	EXCHANGE	ROTARY	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
149	TERM_COND	EXCHANGE	ROTARY	LP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
150	TERM_COND	EXCHANGE	ROTARY	LP	11	Lifting gear if required will be charged at a rate of £400 per day.
151	TERM_COND	EXCHANGE	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
152	TERM_COND	EXCHANGE	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
153	TERM_COND	EXCHANGE	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
154	TERM_COND	EXCHANGE	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
155	TERM_COND	EXCHANGE	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
156	TERM_COND	EXCHANGE	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
157	TERM_COND	EXCHANGE	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
158	TERM_COND	EXCHANGE	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
159	TERM_COND	EXCHANGE	ROTARY	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
160	TERM_COND	EXCHANGE	ROTARY	MP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
161	TERM_COND	EXCHANGE	ROTARY	MP	11	Lifting gear if required will be charged at a rate of £400 per day.
162	TERM_COND	EXCHANGE	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
163	TERM_COND	EXCHANGE	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed..
164	TERM_COND	EXCHANGE	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
165	TERM_COND	EXCHANGE	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
166	TERM_COND	EXCHANGE	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
167	TERM_COND	EXCHANGE	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
168	TERM_COND	EXCHANGE	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
169	TERM_COND	EXCHANGE	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
170	TERM_COND	EXCHANGE	TURBINE	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
171	TERM_COND	EXCHANGE	TURBINE	LP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
172	TERM_COND	EXCHANGE	TURBINE	LP	11	Lifting gear if required will be charged at a rate of £400 per day.
173	TERM_COND	EXCHANGE	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
174	TERM_COND	EXCHANGE	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
175	TERM_COND	EXCHANGE	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
176	TERM_COND	EXCHANGE	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
177	TERM_COND	EXCHANGE	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
178	TERM_COND	EXCHANGE	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
179	TERM_COND	EXCHANGE	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
180	TERM_COND	EXCHANGE	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
181	TERM_COND	EXCHANGE	TURBINE	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
182	TERM_COND	EXCHANGE	TURBINE	MP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
183	TERM_COND	EXCHANGE	TURBINE	MP	11	Lifting gear if required will be charged at a rate of £400 per day.
184	TERM_COND	INSTALL	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
185	TERM_COND	INSTALL	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
186	TERM_COND	INSTALL	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
187	TERM_COND	INSTALL	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
188	TERM_COND	INSTALL	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
189	TERM_COND	INSTALL	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
190	TERM_COND	INSTALL	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
191	TERM_COND	INSTALL	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
192	TERM_COND	INSTALL	DIAPHRAGM	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
193	TERM_COND	INSTALL	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
194	TERM_COND	INSTALL	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
195	TERM_COND	INSTALL	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
196	TERM_COND	INSTALL	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
197	TERM_COND	INSTALL	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
198	TERM_COND	INSTALL	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
199	TERM_COND	INSTALL	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
200	TERM_COND	INSTALL	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
201	TERM_COND	INSTALL	DIAPHRAGM	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
202	TERM_COND	INSTALL	DIAPHRAGM	MP	10	Lifting gear if required will be charged at a rate of £400 per day.
203	TERM_COND	INSTALL	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
204	TERM_COND	INSTALL	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
205	TERM_COND	INSTALL	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
206	TERM_COND	INSTALL	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
207	TERM_COND	INSTALL	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
208	TERM_COND	INSTALL	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
209	TERM_COND	INSTALL	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
210	TERM_COND	INSTALL	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
211	TERM_COND	INSTALL	ROTARY	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
212	TERM_COND	INSTALL	ROTARY	LP	10	Lifting gear if required will be charged at a rate of £400 per day.
213	TERM_COND	INSTALL	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
214	TERM_COND	INSTALL	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
215	TERM_COND	INSTALL	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
216	TERM_COND	INSTALL	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
217	TERM_COND	INSTALL	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
218	TERM_COND	INSTALL	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
219	TERM_COND	INSTALL	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
220	TERM_COND	INSTALL	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
221	TERM_COND	INSTALL	ROTARY	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
222	TERM_COND	INSTALL	ROTARY	MP	10	Lifting gear if required will be charged at a rate of £400 per day.
223	TERM_COND	INSTALL	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
224	TERM_COND	INSTALL	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
225	TERM_COND	INSTALL	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
226	TERM_COND	INSTALL	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
227	TERM_COND	INSTALL	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
228	TERM_COND	INSTALL	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
229	TERM_COND	INSTALL	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
230	TERM_COND	INSTALL	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
231	TERM_COND	INSTALL	TURBINE	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
232	TERM_COND	INSTALL	TURBINE	LP	10	Lifting gear if required will be charged at a rate of £400 per day.
233	TERM_COND	INSTALL	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
234	TERM_COND	INSTALL	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
235	TERM_COND	INSTALL	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
236	TERM_COND	INSTALL	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
237	TERM_COND	INSTALL	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
238	TERM_COND	INSTALL	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
239	TERM_COND	INSTALL	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
240	TERM_COND	INSTALL	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
241	TERM_COND	INSTALL	TURBINE	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
242	TERM_COND	INSTALL	TURBINE	MP	10	Lifting gear if required will be charged at a rate of £400 per day.
243	TERM_COND	OFMAT	DIAPHRAGM	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
244	TERM_COND	OFMAT	DIAPHRAGM	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
245	TERM_COND	OFMAT	DIAPHRAGM	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
246	TERM_COND	OFMAT	DIAPHRAGM	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
247	TERM_COND	OFMAT	ROTARY	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
248	TERM_COND	OFMAT	ROTARY	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
249	TERM_COND	OFMAT	ROTARY	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
250	TERM_COND	OFMAT	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
251	TERM_COND	OFMAT	TURBINE	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
252	TERM_COND	OFMAT	TURBINE	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
253	TERM_COND	OFMAT	TURBINE	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
254	TERM_COND	OFMAT	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
255	TERM_COND	REMOVE	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
256	TERM_COND	REMOVE	DIAPHRAGM	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
257	TERM_COND	REMOVE	DIAPHRAGM	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
258	TERM_COND	REMOVE	DIAPHRAGM	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
259	TERM_COND	REMOVE	DIAPHRAGM	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
260	TERM_COND	REMOVE	DIAPHRAGM	MP	3	Lifting gear if required will be charged at a rate of £400 per day.
261	TERM_COND	REMOVE	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
262	TERM_COND	REMOVE	ROTARY	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
263	TERM_COND	REMOVE	ROTARY	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
264	TERM_COND	REMOVE	ROTARY	LP	4	Lifting gear if required will be charged at a rate of £400 per day.
265	TERM_COND	REMOVE	ROTARY	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
266	TERM_COND	REMOVE	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
267	TERM_COND	REMOVE	ROTARY	MP	3	Lifting gear if required will be charged at a rate of £400 per day.
268	TERM_COND	REMOVE	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
269	TERM_COND	REMOVE	TURBINE	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
270	TERM_COND	REMOVE	TURBINE	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
271	TERM_COND	REMOVE	TURBINE	LP	4	Lifting gear if required will be charged at a rate of £400 per day.
272	TERM_COND	REMOVE	TURBINE	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
273	TERM_COND	REMOVE	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
274	TERM_COND	REMOVE	TURBINE	MP	3	Lifting gear if required will be charged at a rate of £400 per day.
275	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
276	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
277	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
278	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
279	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
280	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
281	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
282	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
283	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
284	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
285	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
286	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
287	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
288	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
289	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
290	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
291	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
292	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
293	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
294	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
295	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	11	Lifting gear if required will be charged at a rate of £400 per day.
296	TERM_COND	STD EXCHANGE	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
297	TERM_COND	STD EXCHANGE	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
298	TERM_COND	STD EXCHANGE	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
299	TERM_COND	STD EXCHANGE	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
300	TERM_COND	STD EXCHANGE	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
301	TERM_COND	STD EXCHANGE	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
302	TERM_COND	STD EXCHANGE	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
303	TERM_COND	STD EXCHANGE	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
304	TERM_COND	STD EXCHANGE	ROTARY	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
305	TERM_COND	STD EXCHANGE	ROTARY	LP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
306	TERM_COND	STD EXCHANGE	ROTARY	LP	11	Lifting gear if required will be charged at a rate of £400 per day.
307	TERM_COND	STD EXCHANGE	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
308	TERM_COND	STD EXCHANGE	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
309	TERM_COND	STD EXCHANGE	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
310	TERM_COND	STD EXCHANGE	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
311	TERM_COND	STD EXCHANGE	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
312	TERM_COND	STD EXCHANGE	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
313	TERM_COND	STD EXCHANGE	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
314	TERM_COND	STD EXCHANGE	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
315	TERM_COND	STD EXCHANGE	ROTARY	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
316	TERM_COND	STD EXCHANGE	ROTARY	MP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
317	TERM_COND	STD EXCHANGE	ROTARY	MP	11	Lifting gear if required will be charged at a rate of £400 per day.
318	TERM_COND	STD EXCHANGE	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
319	TERM_COND	STD EXCHANGE	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
320	TERM_COND	STD EXCHANGE	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
321	TERM_COND	STD EXCHANGE	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
322	TERM_COND	STD EXCHANGE	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
323	TERM_COND	STD EXCHANGE	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
324	TERM_COND	STD EXCHANGE	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
325	TERM_COND	STD EXCHANGE	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
326	TERM_COND	STD EXCHANGE	TURBINE	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
327	TERM_COND	STD EXCHANGE	TURBINE	LP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
328	TERM_COND	STD EXCHANGE	TURBINE	LP	11	Lifting gear if required will be charged at a rate of £400 per day.
329	TERM_COND	STD EXCHANGE	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
330	TERM_COND	STD EXCHANGE	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
331	TERM_COND	STD EXCHANGE	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
332	TERM_COND	STD EXCHANGE	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
333	TERM_COND	STD EXCHANGE	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
334	TERM_COND	STD EXCHANGE	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
335	TERM_COND	STD EXCHANGE	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
336	TERM_COND	STD EXCHANGE	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
337	TERM_COND	STD EXCHANGE	TURBINE	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
338	TERM_COND	STD EXCHANGE	TURBINE	MP	10	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
339	TERM_COND	STD EXCHANGE	TURBINE	MP	11	Lifting gear if required will be charged at a rate of £400 per day.
340	TERM_COND	STD INSTALL	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
341	TERM_COND	STD INSTALL	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
342	TERM_COND	STD INSTALL	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
343	TERM_COND	STD INSTALL	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
344	TERM_COND	STD INSTALL	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
345	TERM_COND	STD INSTALL	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
346	TERM_COND	STD INSTALL	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
347	TERM_COND	STD INSTALL	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
348	TERM_COND	STD INSTALL	DIAPHRAGM	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
349	TERM_COND	STD INSTALL	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
350	TERM_COND	STD INSTALL	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
351	TERM_COND	STD INSTALL	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
352	TERM_COND	STD INSTALL	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
353	TERM_COND	STD INSTALL	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
354	TERM_COND	STD INSTALL	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
355	TERM_COND	STD INSTALL	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
356	TERM_COND	STD INSTALL	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
357	TERM_COND	STD INSTALL	DIAPHRAGM	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
358	TERM_COND	STD INSTALL	DIAPHRAGM	MP	10	Lifting gear if required will be charged at a rate of £400 per day.
359	TERM_COND	STD INSTALL	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
360	TERM_COND	STD INSTALL	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
361	TERM_COND	STD INSTALL	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
362	TERM_COND	STD INSTALL	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
363	TERM_COND	STD INSTALL	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
364	TERM_COND	STD INSTALL	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
365	TERM_COND	STD INSTALL	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
366	TERM_COND	STD INSTALL	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
367	TERM_COND	STD INSTALL	ROTARY	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
368	TERM_COND	STD INSTALL	ROTARY	LP	10	Lifting gear if required will be charged at a rate of £400 per day.
369	TERM_COND	STD INSTALL	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
370	TERM_COND	STD INSTALL	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
371	TERM_COND	STD INSTALL	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
372	TERM_COND	STD INSTALL	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
373	TERM_COND	STD INSTALL	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
374	TERM_COND	STD INSTALL	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
375	TERM_COND	STD INSTALL	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
376	TERM_COND	STD INSTALL	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
377	TERM_COND	STD INSTALL	ROTARY	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
378	TERM_COND	STD INSTALL	ROTARY	MP	10	Lifting gear if required will be charged at a rate of £400 per day.
379	TERM_COND	STD INSTALL	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
380	TERM_COND	STD INSTALL	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
381	TERM_COND	STD INSTALL	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
382	TERM_COND	STD INSTALL	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
383	TERM_COND	STD INSTALL	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
384	TERM_COND	STD INSTALL	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
385	TERM_COND	STD INSTALL	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
386	TERM_COND	STD INSTALL	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
387	TERM_COND	STD INSTALL	TURBINE	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
388	TERM_COND	STD INSTALL	TURBINE	LP	10	Lifting gear if required will be charged at a rate of £400 per day.
389	TERM_COND	STD INSTALL	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
390	TERM_COND	STD INSTALL	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
391	TERM_COND	STD INSTALL	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
392	TERM_COND	STD INSTALL	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
393	TERM_COND	STD INSTALL	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
394	TERM_COND	STD INSTALL	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
395	TERM_COND	STD INSTALL	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
396	TERM_COND	STD INSTALL	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
397	TERM_COND	STD INSTALL	TURBINE	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
398	TERM_COND	STD INSTALL	TURBINE	MP	10	Lifting gear if required will be charged at a rate of £400 per day.
399	CONT_SUM	STD REMOVE	DIAPHRAGM	MP	1	plus purging on time and materials basis.
400	CONT_SUM	STD REMOVE	DIAPHRAGM	MP	2	excluding lifting gear charges
401	CONT_SUM_QA	STD REMOVE	DIAPHRAGM	MP	2	excluding lifting gear charges
402	DESC_WORK	STD REMOVE	ROTARY	LP	2	excluding lifting gear charges
403	DESC_WORK	STD REMOVE	ROTARY	MP	2	excluding lifting gear charges
404	DESC_WORK	STD REMOVE	TURBINE	LP	2	excluding lifting gear charges
405	DESC_WORK	STD REMOVE	TURBINE	MP	2	excluding lifting gear charges
406	TERM_COND	STD REMOVE	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
407	TERM_COND	STD REMOVE	DIAPHRAGM	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
408	TERM_COND	STD REMOVE	DIAPHRAGM	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
409	TERM_COND	STD REMOVE	DIAPHRAGM	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
410	TERM_COND	STD REMOVE	DIAPHRAGM	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
411	TERM_COND	STD REMOVE	DIAPHRAGM	MP	3	Lifting gear if required will be charged at a rate of £400 per day.
412	TERM_COND	STD REMOVE	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
413	TERM_COND	STD REMOVE	ROTARY	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
414	TERM_COND	STD REMOVE	ROTARY	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
415	TERM_COND	STD REMOVE	ROTARY	LP	4	Lifting gear if required will be charged at a rate of £400 per day.
416	TERM_COND	STD REMOVE	ROTARY	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
417	TERM_COND	STD REMOVE	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
418	TERM_COND	STD REMOVE	ROTARY	MP	3	Lifting gear if required will be charged at a rate of £400 per day.
419	TERM_COND	STD REMOVE	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
420	TERM_COND	STD REMOVE	TURBINE	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
421	TERM_COND	STD REMOVE	TURBINE	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
422	TERM_COND	STD REMOVE	TURBINE	LP	4	Lifting gear if required will be charged at a rate of £400 per day.
423	TERM_COND	STD REMOVE	TURBINE	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
424	TERM_COND	STD REMOVE	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
425	TERM_COND	STD REMOVE	TURBINE	MP	3	Lifting gear if required will be charged at a rate of £400 per day.
426	CONT_SUM_QA	REMOVE	ROTARY	LP	1	excluding lifting gear charges
427	CONT_SUM_QA	REMOVE	ROTARY	MP	1	excluding lifting gear charges
428	CONT_SUM_QA	REMOVE	TURBINE	LP	1	excluding lifting gear charges
429	CONT_SUM_QA	REMOVE	TURBINE	MP	1	excluding lifting gear charges
430	CONT_SUM_QA	STD REMOVE	ROTARY	LP	1	excluding lifting gear charges
431	CONT_SUM_QA	STD REMOVE	ROTARY	MP	1	excluding lifting gear charges
432	CONT_SUM_QA	STD REMOVE	TURBINE	LP	1	excluding lifting gear charges
433	CONT_SUM_QA	STD REMOVE	TURBINE	MP	1	excluding lifting gear charges